新闻中心
NEWS
客户服务热线
Customer Senvice Hotline
What should be paid attention to if the weighbridge is to be relocated?
Several points should be noted when assembling the weighbridge:
1: The first step is to prepare some objects necessary for the assembly of the weighbridge; If the work starts without being fully prepared, it is easy to delay the process in half of the assembly, resulting in unstable layout
Set, deform.
2: Loosen the signal wire of each load cell from the junction box, and make a response record when doing so, so as to facilitate the installation of the device in the future on the original position of the junction box.
Otherwise, if the device is in the wrong position, it will lead to a serious problem situation. Secondly, we should pay attention to that the defective line should not be cut, and the main line should also be put away;
3: Assemble the connecting screws between the two scales, which are vertical and horizontal; It is necessary to pay attention to discrimination.
4: Hold the steel ball under the scale body, and the steel shot and the steel shot pad are provided with corresponding thin iron sheet gaskets;
5: During the assembly process, pay attention to fastening the corresponding sensor signal wire to prevent crushing. It is necessary to prevent the load cell from bumping and rushing in the process of disassembly and hoisting
The above points are important to pay attention to. As long as the above points are achieved, the accurate assembly of the weighbridge can be achieved.
相关新闻
2022-04-28
2022-04-21