Customer Senvice Hotline
What should be paid attention to when using electronic truck scale?
The sensor of electronic truck scale is a device that converts mass signal into measurable electrical signal output. We need to pay attention to some matters when using it. How much do you know about this information? Let's give you a detailed analysis:
The elastic body of the electronic truck scale sensor has a special structure and good bending and torsion resistance, thus improving the natural vibration frequency of the sensor and its characteristics of anti overturning, anti deflection, anti interference, etc. The sensor can be installed and connected with special connecting components, which is convenient and reliable. It has high precision, good reliability, convenient installation, stable performance, good dust and moisture prevention measures, and can work normally in various natural environments.
The sensor shall be kept away from high heat source as far as possible during use. When checking the insulation resistance of the electronic truck scale sensor, the voltage of the megger cannot exceed 100V. It is strictly prohibited to use a megger to test the equipment. The sensor of electronic truck scale shall be placed in the environment of - 10 ℃~50 ℃ and relative humidity ≤ 85%. The air shall not contain corrosive gas and other substances.
During the design and installation of the loading device, it shall be ensured that the action line of the applied loading force coincides with the force axis of the sensor, so as to reduce the influence of the inclined load and eccentric load. To prevent chemical corrosion, the external surface of the sensor should be coated with Vaseline during installation.
The electronic truck scale sensor housing, protective cover plate and lead connector are all sealed. Users are not allowed to open the package or forcibly pull the lead without authorization. If any fault is found, it should be sent to the manufacturer for maintenance.
Huizhou Weighbridge Weighing Equipment Co., Ltd., through scientific management, strictly implements the requirements of the quality management system, constantly absorbs the opinions of customers, learns the technical experience of international advanced products, continuously improves the structure and functions of products, and prevents the defects and deficiencies of products, striving to be a good brand in the weighing instrument industry.