新闻中心

NEWS

图片名称

客户服务热线

Customer Senvice Hotline

What points should be paid attention to when installing the weighbridge?

What points should be paid attention to when installing the weighbridge? The following points should be noted when analyzing the installation of the weighbridge:
1: Make preparations to prepare some objects necessary for the assembly of the weighbridge; If the work is started without being fully prepared, it is easy to delay the process in half of the assembly, resulting in the use of unstable layout and deformation.
2: Loosen the signal wire of each load cell from the junction box, and make a response record when doing so, so as to facilitate the installation of the device in the future on the original position of the junction box.
Otherwise, if the device is in the wrong position, it will lead to a serious problem situation. Secondly, we should pay attention to that the defective line should not be cut, and the main line should also be put away;
3: Assemble the connecting screws between the two scales, which are vertical and horizontal; It is necessary to pay attention to discrimination.
4: Hold the steel ball under the scale body, and the steel shot and the steel shot pad are provided with corresponding thin iron sheet gaskets;
5: During the assembly process, the weighbridge manufacturer should also pay attention to fastening the corresponding sensor signal wire to prevent crushing and breakage. It is necessary to prevent the load cell from bumping and rushing in the process of disassembly and hoisting. The above points are important to pay attention to. As long as the above points are achieved, the accurate assembly of the weighbridge can be achieved. However, here is a reminder that if there is a serious problem with the weighbridge and it cannot be handled by yourself, do not force yourself to handle it. Be sure to ask amateur technicians to handle it, otherwise, it will be able to produce significant results.
Weighbridge maintenance and protection device Weighbridge is used by more and more people. Weighbridge is also called electronic truck scale. The maintenance and protection of weighing bridge is very tight, which directly affects the service life and accuracy of weighing bridge (electronic truck scale)
More and more people are installing and using the weighbridge. The weighbridge is also called electronic truck scale. The maintenance and protection of the weighbridge is very tight, which directly affects the service life and accuracy of the weighbridge (electronic truck scale). The maintenance and protection of the useful weighbridge has a great impact on the low maintenance rate of the truck scale. How to maintain and protect the weighbridge? The above several proposals on the conventional weighbridge care and protection supply are expected to be helpful to all customers.

相关新闻

About us     |     Honor     |     News Center     |     Technical service     |     Feedback     |     Contact us 

Building material     |         Luqiao     |      Metallurgy     |      Petroleum     |       Traffic logistics    |       Other

Scale, platform scale business hotline: 0771-3159933  

Platform scale, electronic scale business hotline: 0771-3153889After service

telephone: 0771-3165266

Complaint telephone: 0771-3154958

Company address: No. 10, North inter South Road, Nanning.

Q Q: 1363900082
Mailbox:nngflz@163.com

Fax: 0771-3170520

Bus Line: Chaoyang Square can take No. 18; Langdong Station, Xixiangtang Station can take No. 76; Jinqiao Station can take No. 81; Jiangnan Station can take No. 207 and No. 81 to get off at Beijida intersection.

Copyright ©  Nanning Weighing Machine Factory