Customer Senvice Hotline
What are the essentials of the three things of digital truck scale operation?
What are the main points of the three things before, during and after the operation of digital truck scale? Hengwang weighing equipment -- small compilation of weighbridge and truck scale manufacturers
Before and during the operation of the digital truck scale, the operator shall check the equipment and timely remove the faults if any:
1、 Before operation
1.1 Before operation, check the digital truck scale surface and its surroundings for sundries; Whether the horizontal and longitudinal limit value of the digital truck scale is within the specified range (2~3mm).
1.2 Whether the display of digital truck scale is normal and whether it can automatically return to zero; Restart the computer and weighing system. After logging in correctly, check whether the system data is synchronized with the instrument data.
1.3 Check whether the network connectivity, mouse, keyboard, printer, UPS, etc. are normal
1.4 Check whether the monitoring image is clear and the display is normal.
1.5 Check whether other equipment is abnormal.
2、 In operation
2.1 The vehicle can be weighed after the digital truck scale is reset to zero
2.2 All cars shall be loaded. The vehicle shall be loaded at a constant speed and braked slowly. The vehicle body shall be parked in the middle of the truck scale, and the short vehicle shall be parked in the middle of the scale body and within 4 meters from the identifier.
2.3 All the infrared monitors of the vehicle weighing have no alarm.
2.4 Weigh after the vehicle stops stably and no one is in the vehicle.
2.5 When the instrument data is synchronized with the computer display and there is no digital jitter, click the weighing and saving disk, and operate in strict sequence: vehicle identification, weighing, saving and printing.
2.6 The vehicle shall not stay on the pound for too long. The vehicle can be unloaded after the data is saved.
2.7 If the instrument display is abnormal during operation and there is a fault, the vehicle shall be unloaded, and the network administrator and technician shall be notified for troubleshooting or maintenance.
2.8 In case of computer or relevant software failure during operation, unplug the computer network cable first, stop weighing operation, shut down the computer, and report to the leader in charge for maintenance; The computer is not allowed to connect to mobile storage devices (such as USB flash disk, MP3, etc.); It is strictly forbidden to change the computer settings without permission and operate under the designated user.
2.9 It is prohibited to wipe computers, instruments and other electrical equipment with wet cloth during operation, and it is prohibited to tear indoor and outdoor lines at will to ensure the safety of electricity use.
2.10 If the operation cannot be carried out for more than one hour due to power failure and other factors, the computer, relevant equipment and power supply shall be turned off.
3、 After operation
3.1 Shut down the software and computer, make relevant records, and hand over.
3.2 Clean the computer monitor, chassis shell and printer with the power off.
The above is today's sharing of all the essentials of the three things before, during and after the operation of digital truck scale. I hope it will be helpful for everyone to use this equipment in the future. Huizhou Weighbridge Weighing Equipment Co., Ltd., through scientific management, strictly implements the requirements of the quality management system, constantly absorbs the opinions of customers, learns the technical experience of international advanced products, continuously improves the structure and functions of products, and prevents the defects and deficiencies of products, striving to be a good brand in the weighing instrument industry.