Customer Senvice Hotline
How to select the appropriate weighbridge position?
The toll station at the expressway intersection is very busy during the holiday, but have you noticed the procedure that large vehicles need to carry out, namely, weighing! Then we will talk about the weighbridge. Next, the manufacturer of the weighbridge will introduce how to select the appropriate weighbridge position?
The site selection of the electronic weighbridge should first have a good drainage channel, and the location should not be lower than the surrounding area, so as to avoid water accumulation and damage to the weighbridge in rainy days. Speaking of this, we should popularize a little knowledge - shallow foundation pit and no foundation pit. Shallow foundation pit refers to that the surface of the electronic weighbridge is flush with the ground after installation, while without foundation pit, the surface of the weighbridge is higher than the ground. Without foundation pit, slopes need to be built on both sides of the weighbridge to facilitate getting on and off.
Therefore, the platform installed in the shallow foundation pit must meet the requirements of good drainage channel, and at the same time, there must be a straight road with sufficient length at both ends for the truck to get on and off the platform. The straight roads at both ends must be at least equal to the length of the platform.