新闻中心

NEWS

图片名称

客户服务热线

Customer Senvice Hotline

Selection of weighbridge sensor

Selection of weighbridge sensor
Weighbridge sensor is actually a device that converts weighing signal into analog electrical signal or digital electrical signal output. The sensor is selected correctly according to different actual working environments. The accuracy and life of the sensor are directly shaped to avoid unnecessary loss.
1. High temperature environment. High temperature resistant sensors are often used for sensors working in high temperature environment; Avoid problems such as melting of coating materials, weld joint development, structural change of internal stress in the elastomer, etc
2. In a dusty and humid environment, which is easy to cause short circuit, sensors with high airtightness should be selected.
3. In highly corrosive environment, damp and acid will cause elastomer damage or short circuit, so stainless steel housing shall be selected, and sensors with good corrosion resistance and airtightness shall be used.
4. Electromagnetic field interference. Some environmental interference directly affects the accuracy or the weighing display is unstable. The source of the impact on the environmental inspection should be the source, and the platform scale sensor with good shielding should be selected
5. Explosion proof sensors must be selected for flammable and explosive environments.

相关新闻

About us     |     Honor     |     News Center     |     Technical service     |     Feedback     |     Contact us 

Building material     |         Luqiao     |      Metallurgy     |      Petroleum     |       Traffic logistics    |       Other

Scale, platform scale business hotline: 0771-3159933  

Platform scale, electronic scale business hotline: 0771-3153889After service

telephone: 0771-3165266

Complaint telephone: 0771-3154958

Company address: No. 10, North inter South Road, Nanning.

Q Q: 1363900082
Mailbox:nngflz@163.com

Fax: 0771-3170520

Bus Line: Chaoyang Square can take No. 18; Langdong Station, Xixiangtang Station can take No. 76; Jinqiao Station can take No. 81; Jiangnan Station can take No. 207 and No. 81 to get off at Beijida intersection.

Copyright ©  Nanning Weighing Machine Factory